JL Audio C2-525 60W 5 ¼” 2-Way Speakers JL Audio

2-Way Component System: 5 ¼-inch (130 mm) Woofer, 0.75-inch (19 mm) Silk Dome Tweeter

The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and long linear excursion woofer designs.

The C2-525 system features 5.25-inch (130 mm) component woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio’s vast woofer design experience and advanced modeling systems.

The C2 component tweeters are built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs.

C2 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Three levels of tweeter attenuation are provided, as well as a tweeter protector.

Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo.

Sonic character: Clean and Dynamic

Sold as a pair.

Silk Dome Tweeter

Summary:
Light, fast moving silk dome material promotes high-frequency accuracy. 

Detailed Information:
Silk is a natural material with inherently good characteristics as a tweeter diaphragm. In addition to being very light in weight, silk exhibits excellent damping properties, which reduces ringing and resonances in the tweeter’s passband, leading to a smooth, pleasing high-frequency character free from unnatural sibilance or exaggerated brightness. Compared to a harder material dome, a silk tweeter does not exhibit as much ultra-high frequency extension, but is preferred by many audiophiles for its overall balance.

 

General Specifications
Continuous Power Handling (RMS) – 60 W
Recommended Amplifier Power (RMS) – 15 – 100 W / Ch.
System Efficiency – 89.0 dB @ 1 W / 1 m
System Nominal Impedance – 4 Ω
System Frequency Response – 63 Hz – 22 KHz ± 3 dB

Woofer Physical Specifications
Frame Outer Diameter* (A) – 5.20 in / 132 mm
Grille Tray Outer Diameter (B) – 6.01 in / 153 mm
Motor Outer Diameter (C) – 2.76 in / 70 mm
Frontal Coaxial Tweeter Protrusion (D) – N/A
Frontal Grille Protrusion** (E) – 0.72 in / 18 mm
Mounting Hole Diameter (F) – 4.56 in / 116 mm
Mounting Depth (G) – 2.50 in / 64 mm
*Does not take into account mounting tabs
**Frontal grille protrusion measured from mounting surface

Tweeter Physical Specifications
Flush Mount Fixture Diameter (A1) – 1.87 in / 48 mm
Surface Mount Fixture Diameter (A2) – 1.69 in / 43 mm
Flush Mount Mounting Hole Diameter (B) – 1.625 in / 41 mm
Flush Mount Mounting Depth (C) – 0.76 in / 19 mm
Flush Mount Tweeter Frontal Protrusion (D1) – 0.29 in / 7 mm
Surface Mount Tweeter Frontal Protrusion (D2) – 0.92 in / 23 mm

Crossover Physical Specifications
Width (W) – 3.36 in / 85 mm
Height (H) – 1.44 in / 37 mm
Depth (D) – 4.72 in / 120 mm

 

Have Questions About This Product? Message us here or:

Email Us At: info@teamiu

Call Us At: 315-458-5000