Monoblock Class D Car/Marine Subwoofer Amplifier, 1000 W x 1 @ 2 Ω / 600 W x 1 @ 4 Ω – 14.4V
This monoblock subwoofer powerhouse employs our high-speed NexD™ switching technology to achieve unprecedented efficiency and amazing power output from a very compact chassis. The XDM1000/1 generates up to 1000 W of continuous power into a 2 ohm load (14.4V, 1% THD), making it a great choice to drive higher power subwoofer systems.
Designed for car or boat installations, the XDM1000/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.
Intended specifically for subwoofer applications, the XDM1000/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz and a defeatable infrasonic filter (30 Hz, 24 dB/oct.). With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier’s level can be adjusted directly from the driver’s seat or captain’s chair.
Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.
General Specifications
Frequency Response | 7 Hz – 500 Hz (+0, -1dB) |
S/N Ratio, referred to highest rated power | >83 dB below rated power (A-weighted, 20 Hz – 20 kHz noise bandwidth) |
S/N Ratio, referred to 1 W | >53 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth) |
Damping Factor @ 4 Ω | >1000 / 50 Hz |
Damping Factor @ 2 Ω | >500 / 50 Hz |
THD+N @ Rated Power | <1% @ 2 Ω per Ch. |
Input Voltage Range @ RCA Inputs | 200 mV – 4 V RMS |
Min.Copper Power / Ground Wire Gauge | 4 AWG wire |
Fuse Rating | 80 A (AFS, AGU or MaxiFuse™) |
Signal Processing
Filter Mode(s) | Low-Pass only |
Filter Slope(s) | 12/24 dB/octave |
Filter Frequency Range | 50 Hz – 500 Hz |
Detented, Calibrated Filter Freq. Potentiometer | Yes |
Filter Defeat Function | Yes |
Infrasonic Filter | 30 Hz, defeatable |
Bass Boost EQ | No |
Output Polarity Switch | No |
Remote Subwoofer Level Control | Optional HD-RLC or MHD-RLC (water-resistant) |
Remote Bass EQ Boost Control | No |
Pass-Through Preamp Output | Buffered |
Physical Specifications
Height (H) | 2.05 in / 52 mm |
Width (W) | 14.73 in / 374 mm |
Depth (D) | 7.09 in / 180 mm |